The VideoMicro is a compact microphone designed to improve the audio quality of your videos. It incorporates a high-quality cardioid condenser microphone capsule for great quality audio recordings when used with a wide range of cameras. A directional microphone, the VideoMicro reduces distracting peripheral sounds and focuses on the audio in front of the camera. Its pickup is more forgiving than RØDE’s other on-camera microphones providing a more natural sound when recording indoors.
SKU: RODVMICRO
Features
To use with mobile phones you will also need the RØDE SC7
3/8"-16 thread
Compact size and lightweight - only 80mm (3’) long and 42gm (1.5oz)
All-metal microphone body
No battery required (powered by camera plug-in power - min 3V)
Rycote® Lyre® shock mount included
Deluxe furry windshield included
Designed and manufactured in Australia
Two year extended warranty when you register your microphone
In The Box
VideoMicro
Lyre Shoe Mount
SC2 - 3.5mm TRS patch cable
WS9 Deluxe Wind Shield
Form Factor
Stand/Boom Mount
Sound Field
Mono
Operating Principle
Pressure Gradient
Capsule
Electret Condenser
Diaphragm
0.5" / 12.70 mm
Polar Pattern
Cardioid
Orientation
End Address
Circuitry
Solid-State (JFET)
Frequency Range
100 Hz to 20 kHz
Maximum SPL
140 dB SPL
Off-Axis Rejection
2 dB at 60° |
14 dB at 120° |
24 dB at 180°
Sensitivity
-33 dBV/Pa at 1 kHz
Dynamic Range
120 dB
Signal-to-Noise Ratio
75 dB A-Weighted
Equivalent Noise Level
20 dB A-Weighted
Output Connectors (Analog)
1 x 1/8" / 3.5 mm TRS Female (on Mic)
Cable Length
6.69 to 15.75" / 17 to 40 cm
Number of Conductors
2
Operating Voltage
2 to 5 V (Plug-In Power)
Mounting
Camera/Shoe-Mount, Shockmount (with Included Hardware)
The VideoMicro is a compact microphone designed to improve the audio quality of your videos. It incorporates a high-quality cardioid condenser microphone capsule for great quality audio recordings when used with a wide range of cameras. A directional microphone, the VideoMicro reduces distracting peripheral sounds and focuses on the audio in front of the camera. Its pickup is more forgiving than RØDE’s other on-camera microphones providing a more natural sound when recording indoors.
SKU: RODVMICRO
Features
To use with mobile phones you will also need the RØDE SC7
3/8"-16 thread
Compact size and lightweight - only 80mm (3’) long and 42gm (1.5oz)
All-metal microphone body
No battery required (powered by camera plug-in power - min 3V)
Rycote® Lyre® shock mount included
Deluxe furry windshield included
Designed and manufactured in Australia
Two year extended warranty when you register your microphone
In The Box
VideoMicro
Lyre Shoe Mount
SC2 - 3.5mm TRS patch cable
WS9 Deluxe Wind Shield
Form Factor
Stand/Boom Mount
Sound Field
Mono
Operating Principle
Pressure Gradient
Capsule
Electret Condenser
Diaphragm
0.5" / 12.70 mm
Polar Pattern
Cardioid
Orientation
End Address
Circuitry
Solid-State (JFET)
Frequency Range
100 Hz to 20 kHz
Maximum SPL
140 dB SPL
Off-Axis Rejection
2 dB at 60° |
14 dB at 120° |
24 dB at 180°
Sensitivity
-33 dBV/Pa at 1 kHz
Dynamic Range
120 dB
Signal-to-Noise Ratio
75 dB A-Weighted
Equivalent Noise Level
20 dB A-Weighted
Output Connectors (Analog)
1 x 1/8" / 3.5 mm TRS Female (on Mic)
Cable Length
6.69 to 15.75" / 17 to 40 cm
Number of Conductors
2
Operating Voltage
2 to 5 V (Plug-In Power)
Mounting
Camera/Shoe-Mount, Shockmount (with Included Hardware)
Construction Material
Metal
Dimensions
ø: 0.83 x L: 3.15" / ø: 21 x L: 80 mm
Weight
1.48 oz / 42 g
Tiny But Mighty
The Rode VideoMicro is probably the most popular on-camera microphone out there currently. The difference between having it on your device and not having it is huge. It's a budget-friendly no-brainer
