Lens Adapter

How to Attach your V2 Lens Adapter:

Video - 00:50 seconds

1. Before removing adhesive backer tape, take note of how the adapter aligns with the lens interface and make sure the metal surface of your lens is clean.

2. Once you see how it should be aligned, remove the adhesive backer using the tab. 

3. Carefully align the adapter over the lens interface.  

4. When it is properly aligned, press on the adapter to push into place.  

5. Flip the lens over and push down on the adapter on a hard surface for 5-10 seconds to make sure it is fully seated and the adhesive is making solid contact.

6. Congrats! You're all set to use your original lens with the new Photo Case or Battery Photo Case.